Kernersville Plumbing Company handles the full range of residential and commercial plumbing work across Kernersville and Forsyth County, from a dripping faucet to a burst pipe to a water heater that stopped working overnight. We take calls every day from 7:30 AM to 9:00 PM, so whether you manage a rental property, own a home, or run a business, there is someone available to scope the job and get you a price before anything is scheduled.
Good plumbing work isn't complicated, it's just done right, and that starts with showing up prepared and knowing what you are looking at. We work on homes, multi-unit rentals, commercial properties, and everything in between. Whatever the plumbing problem, the process is the same: find the cause, explain the fix, and get it done.
Draining faucet fixed. Slow drain cleared. Water flowing right.
Keeping a home dry starts with the pipes behind the walls, and when something goes wrong, the range of work we handle is broad. Fixture installation, bathroom and kitchen plumbing repairs, outdoor hose bibs, water line repairs, full replacements, and urgent calls when something lets go without warning. We work on it all.
For homeowners, that means a single call covers most of what comes up in a house. For landlords and property managers, it means one contact for repairs across multiple units, with a price confirmed on the call before anything is scheduled and a clear explanation of what that price covers.
We are a straightforward choice for homeowners and property managers who need reliable plumbing work handled without the back-and-forth. The rate is confirmed on the phone, what it covers is explained before we schedule, and the work gets done. Leave the leak to us.
A slow drain is easy to ignore until it backs up entirely. We clear sink clogs, toilet clogs, tub and shower drains, floor drains, and main line blockages. The visit starts with scoping the blockage to understand what is causing it, not just pushing it further down the line.
For stubborn stoppages or main line clogs that keep coming back, hydro jetting is an option. High-pressure water clears grease, scale, and debris from the pipe walls rather than just punching a hole through the clog. Once the line is clear, we confirm flow before we leave.
Reach out and tell us what the drain is doing.
Getting your water flowing again is easier than you think, but finding the source of a leak is where the real work begins. Water has a way of traveling along framing and pooling far from where it entered. We use pressure testing and electronic detection methods to locate leaks behind walls, under slabs, and in supply lines without unnecessary demolition.
A small drip is easier to deal with than the water damage it leads to. We find the source before we recommend a repair, and we explain what we found rather than handing you a patch and a bill. The cause of a leak is explained, not just the patch.
Slab leaks are a particular concern in older construction and in homes where the supply lines run under the foundation. We handle slab leak detection and repair directly, scoping the line, pinpointing the failure, and discussing repair options before anything is opened up.
No hot water is one of those problems that cannot wait. When a water heater stops working, the visit covers a full diagnosis first: element failure, thermostat issues, sediment buildup, a failed anode rod, or a tank that has simply reached the end of its useful life. We do not recommend replacement until we know what actually failed.
We work on both tank and tankless water heaters. If a tankless unit is losing pressure, cycling inconsistently, or throwing an error code, we diagnose the cause and repair it. If a tank unit is leaking or corroded beyond repair, we handle the replacement and haul out the old unit.
Honest recommendations on repairs, never an upsell. You get a straight answer on whether the repair makes sense or whether a new unit is the better call for your situation. One call and the repair is scoped.
Choosing the right plumbing fix is easier than it sounds, especially for the everyday problems that come up in any home. A running toilet wastes water continuously and often points to a worn flapper, a fill valve that needs adjustment, or a flush valve that has failed. We diagnose the cause and fix it, or replace the toilet if the hardware is too far gone to repair economically.
Faucet repairs follow the same logic. A dripping faucet is usually a worn cartridge or seat washer, but we check the whole fixture before we close it up. We also handle full fixture replacements, sink installations, and bathroom or kitchen upgrades where new fixtures need proper rough-in connections.
Whatever the fixture, we protect your floors and finishes while we work. Drop cloths, careful handling, and a clean workspace when the job is done.
Getting your plumbing problem handled starts with a quick call, and that is especially true for a sewer backup. When a main line clogs or collapses, every drain in the building is affected. We handle sewer line cleaning, sewer backup repairs, main line clogs, and full sewer line replacements when the pipe is past clearing.
Where the line allows it, trenchless repair methods can address cracks, root intrusion, and pipe deterioration without digging up the yard. We assess the line first, explain what we find, and discuss which approach fits the situation and the budget before any work begins.
We'll sort the plumbing and clean up after.
Garbage disposals that hum but do not spin, low water pressure that has been getting worse, a main shutoff valve that leaks when it is turned, supply lines that need replacing throughout an older home. These are the jobs that do not fit a single category but still need a plumber.
We handle garbage disposal repair and installation, water pressure diagnostics, shutoff valve replacement, whole-home repiping, and gas supply line work on the plumbing side. Repiping is a bigger job, but it is the right answer when corroded or undersized pipes are causing repeated failures throughout the house.
We protect your floors and finishes while we work, whether that means a single shutoff valve or a multi-day repipe. The scope and the price are settled on the call before anything starts.
Drains that run clear. Faucets that don't drip. Pipes that hold.
Kernersville sits in the Piedmont, where the housing stock ranges from newer subdivisions to homes that have been standing for decades. Clay-heavy soils, seasonal rain events, and a mature tree canopy across older neighborhoods all create plumbing conditions that show up on a regular basis. The three services below come up often in this area for specific reasons.
Piedmont clay does not drain quickly. When a heavy rain event moves through Forsyth County, basements and crawl spaces in clay-soil areas can take on water faster than the ground can absorb it. A properly installed sump pump pulls that water out before it reaches flooring, framing, or stored belongings. We handle new installations, pump replacements, and float switch repairs, and we confirm the discharge line routes away from the foundation before the job is complete.
Established neighborhoods in and around Kernersville carry mature trees whose root systems extend well beyond the canopy. Roots follow moisture, and the joints in older sewer lines are exactly the kind of entry point they find. Once roots are inside a line, they grow and cause recurring clogs, slow drainage, and eventually pipe damage. We clear root intrusion, assess the extent of the damage, and discuss repair or lining options where trenchless methods apply.
Municipal water in Forsyth County carries enough hardness to leave scale on fixtures, inside water heaters, and on appliance heating elements over time. A whole-home softener installation addresses that at the point of entry, protecting the plumbing downstream. We size the unit to the home, connect it to the supply line, and set up the bypass valve so the system can be serviced without interrupting water supply to the house.
We take calls from across the region, not just within Kernersville city limits. Forsyth County and the communities around it are all part of the area we cover on a regular basis.
That includes Winston-Salem, High Point, Greensboro, Thomasville, Walkertown, Rural Hall, and Summerfield. If you are nearby and need a plumber, call for a quote and we will confirm availability for your address.
Getting your plumbing problem handled starts with a quick call. When you reach us, you are talking to someone who knows the trade and can ask the right questions to scope the job on the phone. That conversation covers what is happening, what the likely cause is, and what the repair involves.
The price is confirmed before anything is scheduled. You know the rate and what it covers before we arrive, so there is nothing to figure out after the fact. At the visit, we assess the situation, explain what we find, and get the work done.
We are available every day from 7:30 AM to 9:00 PM. For urgent calls, ask what the schedule allows and we will work out the fastest option available. We'll sort the plumbing and clean up after.
Water stains on ceilings or walls, a mildew smell in a room that should be dry, peeling paint or bubbling drywall, and a water bill that has climbed without a change in usage are all common signs of a leak running behind a surface. Hidden leaks often travel along framing before they show up visually, so the stain may appear far from the actual source. We use pressure testing and electronic detection methods to locate the source accurately before anything is opened up.
Roots follow moisture and find their way into sewer lines through joints, cracks, and any small gap in older pipe. Once inside, they grow and gradually narrow the interior of the line, causing slow drainage, recurring clogs, and eventually a full blockage or pipe damage. We clear the root intrusion, assess the condition of the affected section, and discuss repair or trenchless lining options depending on what the inspection shows.
Forsyth County soils are heavy in clay, which means water moves slowly through the ground during heavy rain events. Basements and crawl spaces in clay-soil areas can take on water faster than the ground absorbs it, and without a working sump pump, that water sits against the foundation and causes damage. A properly installed sump pump pulls water out of the collection pit and routes it away from the structure through a discharge line.
The municipal water supply in the Forsyth County area carries enough hardness to leave mineral scale on fixtures, inside water heater tanks, and on appliance heating elements over time. A whole-home water softener is installed at the point of entry and treats the water before it reaches any fixture or appliance. Installation covers the softener unit, the supply connections, and a bypass valve so the system can be serviced without interrupting water to the house.
A tank water heater that is losing recovery time is often dealing with sediment buildup on the bottom of the tank, a failing heating element, or a thermostat that is no longer calibrated correctly. Sediment accumulates from minerals in the water supply and insulates the heating element from the water, making the unit work harder for less output. We diagnose the cause before recommending a repair or replacement, and we give you a straight read on whether the unit is worth repairing.
A water heater that is running inefficiently or leaking slowly can affect water pressure, raise utility costs, and cause water damage at the connections or at the base of the tank before the failure becomes obvious. Scale that builds up inside a tank also works its way into supply lines over time, narrowing the interior and reducing flow at fixtures. Catching a failing unit early keeps the repair limited to the water heater rather than extending to the lines and fixtures around it.
If there is an active leak, locate the shutoff valve closest to the source and turn it off. If you cannot find an individual fixture shutoff, the main shutoff for the house will stop the flow. Do not use drain-clearing chemicals while waiting for service, as they can complicate the repair and are rarely effective on a serious clog.
Call (336) 936-5195 and describe what is happening so we can scope the job before we arrive.
Most plumbing repairs require shutting off the water to the affected fixture or section of pipe, and some jobs require turning off the main supply to the house. We confirm the shutoff requirements on the call when we scope the job so you can plan around it. The timeline for how long the water stays off depends on what the repair involves, and we explain that before work begins.
The price is set based on what is described on the call. If the job turns out to involve more than what was discussed, such as a pipe that is more damaged than the symptoms suggested or a fitting that requires additional access, we stop and explain what we found before doing anything beyond the original scope. You confirm the updated price before the additional work proceeds.
Homes built with galvanized steel supply lines are common in older parts of Kernersville and Forsyth County. Galvanized pipe corrodes from the inside over time, narrowing the interior diameter and producing pinhole leaks or a steady drop in pressure across the whole house. Spot repairs can address individual failures, but when leaks are appearing in multiple locations, a whole-home repipe is often the more practical long-term answer.
Supply lines and shutoff valves that have not been replaced in many years are worth looking at, particularly in homes with galvanized or braided supply lines showing corrosion or stiffness. A shutoff valve that leaks when turned, or one that cannot be fully closed, is a liability during any repair that requires isolating a fixture. We assess the condition of valves and supply lines as part of any visit where access makes it practical.
Kernersville Plumbing Company is available every day from 7:30 AM to 9:00 PM for residential and commercial plumbing work across Kernersville and the surrounding communities. Whether you have a slow drain, a water heater that stopped working, or a sewer line that needs attention, the process starts with a call.
A small drip is easier to deal with than the water damage it leads to.
Call (336) 936-5195 for a quote.
The rate is explained on the phone, the work is scheduled once you have the price, and the job gets done right.
Dripping faucet fixed. Slow drain cleared. Water flowing right.
From a slow drain to a water heater that quit overnight, we handle the full range of residential and commercial plumbing work across Kernersville and the surrounding area. Every job starts the same way: a call to scope the problem, a price confirmed before anything is scheduled, and work that gets done right. The table below covers what each service includes, who it fits best, and one practical thing worth knowing before you call.
| Service | What's Included | Typical Situations | Good to Know |
|---|---|---|---|
| Faucet & Fixture Installation |
| Homeowners updating fixtures or dealing with a drip that has not stopped on its own | We check the whole fixture before closing it up, not just the part that was dripping. |
| Water Pressure & Shutoff Valve Repair |
| Homes with pressure that has been dropping gradually or a shutoff valve that leaks when turned | A shutoff valve that cannot fully close is a liability during any repair that requires isolating a fixture. |
| Toilet Repair & Installation |
| Homeowners with a running toilet, a slow flush, or a unit that needs replacing | A running toilet can waste a significant amount of water before the bill reflects it. The fix is usually a worn internal part. |
| Slab Leak Detection & Repair |
| Homeowners in older construction or homes with supply lines running under the foundation | Catching a slab leak early keeps the repair limited to the pipe. Left alone, the water works into the foundation and the repair grows. |
| Drain Cleaning & Clog Removal |
| Homeowners and landlords with slow or backed-up drains | Hydro jetting clears grease and scale from pipe walls, not just a hole through the clog, which cuts down on repeat calls. |
| Emergency Plumbing |
| Any situation where water is actively damaging the property or the system has failed completely | Locate the shutoff closest to the source before we arrive. If you cannot find it, the main shutoff for the house stops the flow. |
| Water Heater Repair & ReplacementMost Popular |
| Households or rentals with no hot water, inconsistent heat, or a tank that is leaking | We diagnose before recommending replacement. If the unit is worth repairing, we say so. If it is not, we explain why. |
| Garbage Disposal Service |
| Kitchen disposals that hum but do not spin, leak at the base, or have stopped working entirely | A disposal that hums without spinning usually has a jammed grinding plate, which is a straightforward repair in most cases. |
| Whole-Home Repiping |
| Older homes with recurring leaks in multiple locations or pressure that keeps dropping | Spot repairs on corroded galvanized pipe address one failure at a time. When leaks are appearing in several places, a full repipe is often the more practical answer. |
| Leak Detection & Repair |
| Anyone with a rising water bill, water stains, or a mildew smell with no obvious source | Water travels along framing before it shows up visually, so the stain is rarely where the leak is. We locate the source first. |
| Water Softener Installation |
| Forsyth County homeowners dealing with scale on fixtures, inside water heaters, or on appliance elements | The bypass valve lets the system be serviced without cutting water supply to the rest of the house. |
| Sump Pump Installation |
| Kernersville homes on clay soil with a basement or crawl space that takes on water during heavy rain | Piedmont clay drains slowly. A properly routed discharge line matters as much as the pump itself. |
| Sewer & Main Line Service |
| Properties with slow drains across multiple fixtures or a sewage backup | When every drain in the building is affected at once, the problem is almost always in the main line, not at the fixture. |
What are the signs that a water heater should be replaced rather than repaired?
A tank that is actively leaking from the base, one with significant corrosion at the connections, or one that is failing repeatedly despite repairs is usually past the point where repair makes financial sense. We run a full diagnosis on every visit before recommending replacement, and we give you a straight read on whether the unit is worth fixing or whether a new one is the better call for your situation.
What is the difference between tank and tankless water heaters, and how do I know which fits my home?
A tank unit stores a set volume of hot water and reheats it continuously. A tankless unit heats water on demand and does not run out the same way, but it requires adequate gas or electrical supply and the right flow rate for the household. The right choice depends on how many fixtures are running at once, the existing supply lines, and the space available. We walk through both options on the call so you can make an informed decision before anything is scheduled.
How do I know if a clog is in the fixture or in the main line?
A clog at a single fixture, one sink or one tub, points to a blockage in that drain line. When multiple fixtures are slow or backing up at the same time, particularly when using one affects another, the problem is almost always in the main line. We scope the blockage at the start of the visit to confirm where it is before we start clearing it.
Cause Found Before Anything Is Replaced
We diagnose before we recommend. Whether it is a water heater, a slab leak, or a recurring clog, we find the actual cause and explain it before any repair is proposed.
What does hydro jetting clear that a standard snake cannot?
A drain snake punches through a clog but leaves grease, scale, and debris coating the pipe walls. Hydro jetting uses high-pressure water to clear the interior of the pipe itself, not just open a path through the blockage. For main lines with grease buildup or recurring stoppages, jetting addresses the underlying condition rather than just the immediate symptom.
How is a slab leak located without tearing up the floor?
We use pressure testing to confirm there is a leak in the supply line and electronic detection to pinpoint its location before anything is opened up. That narrows the access point to where the failure actually is rather than guessing. Once we know the location, we explain what the repair involves and what access it requires before any work begins.
What causes low water pressure throughout a whole house rather than just at one fixture?
Whole-house pressure loss usually points to a supply-side issue: a partially closed main valve, a failing pressure-reducing valve, or corrosion narrowing the interior of aging pipes. In older Kernersville homes with galvanized steel supply lines, the pipe corrodes from the inside over time and gradually reduces flow at every fixture. We diagnose the cause before recommending a repair, since the fix depends entirely on what is causing the drop.
Clean and Respectful Workmanship
We protect your floors and finishes while we work and leave the area clean when the job is done. Drop cloths and careful handling are part of every visit, not an extra.
Do I need to be home for the plumbing work, or can a tenant or property manager be there instead?
Someone needs to be on site who can describe what is happening, provide access to the affected area, and confirm the price before work begins. That does not have to be the property owner. Landlords and property managers regularly have a tenant or a site contact present, and that works fine as long as the person on site can authorize the job.
What causes a toilet to keep running after it has been flushed?
A running toilet is almost always a worn flapper that is not seating properly, a fill valve that is not shutting off at the right water level, or a flush valve that has failed. The toilet keeps cycling because water is escaping from the tank into the bowl. We diagnose the specific cause and replace the worn part, or replace the whole unit if the hardware is too far gone to repair economically.
Scope Agreed Before Any Pipe Is Cut
The price and the scope are settled on the call before we schedule, and confirmed again on site before work begins. If the job turns out to involve more than what was discussed, we stop and explain before proceeding.
How long does a whole-home repipe typically take?
The timeline depends on the size of the home, the number of fixtures, and how the supply lines are routed through the structure. A smaller home can often be repiped in a day or two. A larger home or one with complicated routing takes longer. We scope the job on the call, give you a realistic timeline before anything starts, and explain what access the work requires so you can plan around it.
What are the signs that a sump pump has failed or is not keeping up?
A pump that runs continuously without moving water, one that does not turn on during a rain event, or a basement or crawl space that is taking on water despite having a pump are all signs of a failure. Float switch problems are a common cause: the switch that tells the pump to turn on stops working correctly. We check the pump, the float, and the discharge line to find the failure point and address it.
When is it worth calling a plumber rather than attempting a repair yourself?
A clogged drain or a running toilet is something many homeowners handle on their own. When the problem involves supply lines, shutoff valves, a water heater, or anything behind a wall or under a slab, a misread of the situation can make the repair more involved than it needed to be. If the symptom is not obvious, if the fix requires cutting into a line, or if the same problem keeps coming back, a call to scope it first costs less than fixing a repair that went sideways.
Call us at (336) 936-5195 to talk through what you are seeing and get a price before anything is scheduled.
(336) 936-5195